Stihl Dynamic Overalls – Design C Class 1

Stihl DYNAMIC overalls – With Design C / Class 1 protection

Practical and comfortable chainsaw protective overalls made from breathable material and perfect for tough environments and more demanding jobs.

• Anthracite with large areas of high-visibility orange and orange straps for improved visibility
• Front and back cut protection, tested in accordance with BS EN 381, additionally reinforced with breathable, waterproof and thorn-resistant material
• Fully elasticated overalls with freedom of movement in the seat and crotch, kidney protection and fitted with ventilation zips and ventilation material on the back of the upper thighs
• STIHL logo on the chest and large thigh pocket with mobile phone pocket on the inside
• Awarded the KWF Pro quality mark

Trousers have cut protection class 1 (=ˆ 20 m/s)

Features We Like

Minimal weight

The new cut protection inserts generation is 30% lighter, making the STIHL DYNAMIC forest work clothing our lightest Class 1 clothing.

Beaver Extreme outer fabric

Provides the necessary robustness; the critical wear points are reinforced with thorn-resistant material.

Breathability

The breathable material of STIHL DYNAMIC forestry work clothing ensures that excess heat and sweat is dissipated to the outside. The simultaneous flow of fresh air ensures a healthy temperature equilibrium.

Improved cut protection

As soon as the protection trousers come into contact with the chain, torn fibre bundles block the sprocket and bring it to a halt. Increased cut protection around the waist exceeds the relevant EN standard, providing even more protection when working with power tools.

Optimal body temperature

The cut protection material has 75% better air permeability (EN 9237) and approximately 21% lower thermal insulation (ISO 5085-1) compared to previous materials.

Thermo-regulation

In winter, the clothing insulates body heat. The left infrared image (blue stands for cold) shows clothing with high thermal insulation. In summer, excess heat escapes through the ventilation material. The image on the right (yellow/ red stands for warm/ very warm) shows the clothing with working ventilation. (similar to illustration)

Vents and mesh lining

Ventilation zips and the mesh lining provide optimal ventilation of the jackets, even if the zips are closed.

Special insulating fabric

Outside dirt, water and wind-repellent polyamide. Cotton inside, which is comfortable to wear. Good insulation properties.

Perfect fit

With optimum style and high elastic, 30-34% stretchable in both directions of stretch material, each part fits exactly to the body’s contours and movements. Nothing is constrained.

Cut protection – Design C

Cut protection areas according to EN 381 Design C. All-round protection for increased protection. The red marked areas show the range of cut protection inserts.

Stretch zone

Stretch material included in high movement areas for greater comfort.

Thorn resistant

Heavy duty, thorn resistant material

Cut Protection

STIHL cut protection is mostly made up of fibres developed exclusively for STIHL. Our cut-protection clothing is tested by the very prestigious European SMP or KWF testing institutes. The cut-protection material is light, breathable and features several layers. If the saw chain penetrates the top layer, bundles of fibres are ripped out and block the sprocket. This stops the chain and dramatically reduces the risk of injury.

Waterproof material

Material is waterproof whilst remaining breathable

– Download PDF Manual Here (If Available)

1) Based on size 52
2) + good ++ very good +++ excellent

Videos You May Like