A lawn tractor with a 586 cc STIGA twin-cylinder engine and hydrostatic transmission, that combine to deliver superior performance and maneuverability. It’s capable of side-discharging and mulching; and it offers an expansive 108 cm cutting width.
Product details and specs
Featuring both side discharge and mulching functions, the adaptable STIGA Tornado 2108 XWSY is just as effective in long, overgrown grass as it is on a well-maintained formal lawn!
In side discharge mode, grass which is too long to mulch is cut and ejected at speed to the tractor’s right, where it will accumulate in tidy rows, before gradually wilting down. In mulching mode, clippings are held under the deck and shredded, before being forced back into the turf by a powerful airflow. They’ll then rot down and vanish, providing the turf with natural nourishment at no additional cost.
The STIGA Tornado 2108 XWSY Lawn Tractor employs a 586 cc STIGA air-cooled four-stroke engine, which, thanks to its V-Twin cylinder arrangement, offers powerful torque with less vibration. The design of the engine also ensures running temperature is minimized and service-life extended.
With a substantial 108 cm twin blade cutting deck and no grass collector to waste time emptying, the Tornado 2108 XWSY is a fast and efficient way to look after a large area.
A washing link makes it quick and easy to remove any dead grass from around the blades and deck area; while long-lasting and energy-efficient headlights provide great forward visibility at any time of day.
There’s no need to stop and change gears with the Tornado 2108 XWSY – instead, the ground-speed, in both forward and reverse, is adjusted via a foot-pedal. This optimizes maneuverability and ensures you’ll be able to mow around and between obstacles safely and accurately.
Produced with careful attention to driver comfort, this version of the Tornado has been equipped with a raised steering wheel, a STIGA Classic adjustable seat and a handy cup holder.
Another key benefit are the extra-large 20″ rear wheels – they offer high-grip traction.
This model has a tow hitch available as an optional accessory, that means you’ll be able to work with any of the trailed attachments available for this STIGA lawn tractor.
Built today for tomorrow, this model comes with a extended 3-year Warranty. (T&C’s Apply)
Please allow up to 7 working days for delivery, however, if your local dealer has the machine in stock then delivery would normally be much sooner.
This premium delivery service is available free of charge with this machine.
Developed for all gardening newbies or those gardeners who want to act quick and achieve a certain gardening standard .
- Lightweight tools
- Easy to start, Easy to use and Easy to store
- Simple and intuitive functions
What kind of gardener are you?
Discover our product range and find the right product to suit your gardening style!
Developed for all gardening newbies or those gardeners who want to act quick and achieve a certain gardening standard.
- Lightweight tools
- Easy to start, adjust, use, clean and store
- Simple and intuitive functions
A step up for the larger garden or just a simple upgrade of your garden tools to take on multiple gardening tasks and activities.
- Robust tools
- Bigger jobs
- Prolonged sessions
- Diversified works
The most powerful and durable products with customised performance and a plethero of functions and accessories – you don’t need to be a professional, these products will make you an Expert.
- Durable tools
- Superior power output
- Perfect for the more intense working environment
- Customise performance
- Fast responsive control
What’s in the box
TORNADO 2108 HW
Petrol garden Tractor
- Mulching kit
- Battery charger
ST 550 Twin Powered by STIGA
Engine rotation speed
Fuel tank capacity
Minimum uncut radius
Cutting height adjustment
Manual with lever
Cutting height positions
Cutting height range
25 – 80 mm
Number of blades
Additional cutting method
Blade engagement type
Front wheel size
Rear wheel size
Pivoting front axle
Seat with Safety Contact Breaker
Trailer hitch kit
Vibration and noise data
Guaranteed sound power level (LwA) – dB(A)
Measured sound power level dB(A)
Measured sound pressure level at operator ear dB(A)
Max vibration on driver’s seat (m/s2)
Max vibration on steering wheels (m/s2)
What is the proper way to clean the machine after mowing the grass? The exterior of the machine must be cleaned with water and neutral detergent, paying attention not to get water in the electrical system, motor and circuit board located under the instrument panel. When washing the cutting device assembly and the expulsion chute, the side discharge deflector must be fitted, the operator must be seated, the cutting device assembly must be in position “1”, the engine running, transmission placed in neutral and the cutting device must be connected. Then connect a water hose to the appropriate pipe fittings and allow the water to flow for a few minutes while keeping the cutting devices in motion. What action should be carried out before winter storage or before storing it for a period longer than 30 days? After allowing the engine to cool down and fully recharging the battery, disconnect the battery cables and store it in a cool and dry place. Empty the fuel tank, clean the machine thoroughly, check the condition of the cutting device assembly, and, if necessary, contact the service centre. Then store the machine with the cutting deck in a lowered position, in a sheltered environment and, if possible, covered with a sheet. What action should be carried out before initially using a machine that has been stored over a winter or for a period longer than 30 days? Refuel it and check the oil level, air filter and petrol filter. Check that the tyres are correctly pressurised and then set up the machine according to how you intend to carry out the mowing (side discharge, collection, rear discharge, mulching). For further information about the preliminary operations and safety checks, please refer to the designated sections of the instructions manual. What standard maintenance operations does the machine need? Before each use, we recommend that you perform safety and control checks, check the tyre pressure, and replenish the fuel and oil tank, if necessary. After each use, arrange for a general cleaning of the machine. Please refer to the designated section of the instruction manual (“maintenance table”) for the regular actions recommended to ensure optimal use of the machine. What are the cutting functions of the machine? The machine can be set up in different cutting modes: side discharge or cutting and chopping the grass using the special “mulching kit” function. The mulching cutting system allows you to mow the grass into fine particles, which remain on the lawn, restore nutrients and support growth. What kinds of parts and accessories can the tractor be equipped with? The machine can be equipped with various parts and accessories to increase its functions and ensure maximum versatility all year round. For the complete list of parts and accessories, please refer to the relevant product page on the website.