Petrol-powered ride-on mower with 352 cc STIGA engine and 98 cm cutting deck with two blades.
Product details and specs
The STIGA Tornado 2098 ride-on mower is designed for those wanting to cut grass with the side discharge function or the choice of mulching with the STIGA mulching plug. With an attractive, modern look, this ride-on mower is powered by a STIGA engine with a net power output of 6.5 kW @ 2800 rpm. The Tornado 2098 has a mechanical transmission and a 98 cm cutting deck with two blades and 2 anti-scalp wheels. The cutting height can be adjusted to 7 positions (from 25 to 80 mm) using a lever next to the driving seat, whilst the blades are activated by an electromagnetic clutch at the touch of a button. Battery charger, front bumper and mulching plug included.
Built today for tomorrow, this model comes with a extended 3-year Warranty. (T&C’s Apply)
Please allow up to 7 working days for delivery, however, if your local dealer has the machine in stock then delivery would normally be much sooner.
This premium delivery service is available free of charge with this machine. show moreshow less
Developed for all gardening newbies or those gardeners who want to act quick and achieve a certain gardening standard .
- Lightweight tools
- Easy to start, Easy to use and Easy to store
- Simple and intuitive functions
What’s in the box
Petrol garden Tractor
- Mulching kit
- Battery charger
ST 350 Powered by STIGA
Engine rotation speed
Fuel tank capacity
Minimum uncut radius
Cutting height adjustment
Manual with lever
Cutting height positions
Cutting height range
25 – 80 mm
Number of blades
Additional cutting method
Blade engagement type
Number of gears
5 forward + 1 reverse
Front wheel size
Rear wheel size
Pivoting front axle
Seat with Safety Contact Breaker
Trailer hitch kit
Vibration and noise data
Guaranteed sound power level (LwA) – dB(A)
Measured sound power level dB(A)
Measured sound pressure level at operator ear dB(A)
Max vibration on driver’s seat (m/s2)
Max vibration on steering wheels (m/s2)
What is the proper way to clean the machine after mowing the grass? The exterior of the machine must be cleaned with water and neutral detergent, paying attention not to get water in the electrical system, motor and circuit board located under the instrument panel. When washing the cutting device assembly and the expulsion chute, the side discharge deflector must be fitted, the operator must be seated, the cutting device assembly must be in position “1”, the engine running, transmission placed in neutral and the cutting device must be connected. Then connect a water hose to the appropriate pipe fittings and allow the water to flow for a few minutes while keeping the cutting devices in motion. What action should be carried out before winter storage or before storing it for a period longer than 30 days? After allowing the engine to cool down and fully recharging the battery, disconnect the battery cables and store it in a cool and dry place. Empty the fuel tank, clean the machine thoroughly, check the condition of the cutting device assembly, and, if necessary, contact the service centre. Then store the machine with the cutting deck in a lowered position, in a sheltered environment and, if possible, covered with a sheet. What action should be carried out before initially using a machine that has been stored over a winter or for a period longer than 30 days? Refuel it and check the oil level, air filter and petrol filter. Check that the tyres are correctly pressurised and then set up the machine according to how you intend to carry out the mowing (side discharge, collection, rear discharge, mulching). For further information about the preliminary operations and safety checks, please refer to the designated sections of the instructions manual. What standard maintenance operations does the machine need? Before each use, we recommend that you perform safety and control checks, check the tyre pressure, and replenish the fuel and oil tank, if necessary. After each use, arrange for a general cleaning of the machine. Please refer to the designated section of the instruction manual (“maintenance table”) for the regular actions recommended to ensure optimal use of the machine. What are the cutting functions of the machine? The machine can be set up in different cutting modes: side discharge or cutting and chopping the grass using the special “mulching kit” function. The mulching cutting system allows you to mow the grass into fine particles, which remain on the lawn, restore nutrients and support growth. What kinds of parts and accessories can the tractor be equipped with? The machine can be equipped with various parts and accessories to increase its functions and ensure maximum versatility all year round. For the complete list of parts and accessories, please refer to the relevant product page on the website.