Brushcutter powered by a 32.6 cc 2-stroke spark ignition motor with straight shaft, single handle and 43 cm cutting width.
Product details and specs
The STIGA SBC 232 brushcutter is powered by a 32.6 cc (0.9 kW) 2-stroke spark ignition motor and has a cutting width of 43 cm. This brushcutter has an ergonomic single loop handle, supplied single harness and a compact and well-balanced design, making it very comfortable to use. The brushcutter is supplied with a metal three-tooth blade and Tap&Go dual line head.
Built today for tomorrow, this model comes with a minimum 2-year Warranty.
A step up for the larger garden or just a simple upgrade of your garden tools to take on multiple gardening tasks and activities .
- Robust tools
- Bigger jobs
- Prolonged sessions
- Diversified work
What’s in the box
Petrol grass trimmer
- Nylon head
- Metal blade
- Plastic bottle
- Socket spanner
Engine rotation speed
Maximum engine speed
Idling speed (+/- 100)
Easy start recoil
Manual with automatic return
Fuel tank capacity
Ignition coil type
Air filter type
Nylon line diameter (millimeter)
Nylon head type
Bump & Work dual line
Nylon line length
Vibe Control System (VCS)
Shaft tube diameter
Inner shaft diameter
Soft grip handle
Included tools kit
Spark plug key, screwdriver
Vibration and noise data
Guaranteed sound power level (LwA) – dB(A)
Measured sound pressure level at operator ear dB(A)
Vibration level front handle (m/s2)
Vibration level rear handle (m/s2)
Measured sound power level dB(A)
Product weight without cutting system
Videos What kind of protective gear should I use? Using this machine requires clothing that protects the legs and face from objects that could unexpectedly be thrown out during operation. It is always recommended to wear long trousers and a protective visor. What kind of maintenance should I carry out? To ensure that the machine is functioning correctly and to maximise its lifespan, we recommend regular (based on the frequency and intensity of use) cleaning of the air filter, sparking plug and cutting head (trimmer head and guard) – parts where a lot of dirt constantly builds up.
Remember that it is important to consult the user and maintenance manual for details of each of these tasks. Which type of grass and shrubs can you work on? This machine is able to tackle coarser plant conditions, from dense bushes with tall grass to shrub areas, where you can also cut the more stubborn plants and shrubs using the supplied metal blade. How do you adjust the length of the line? This model is fitted with a head using the Tap&Go system. This means that, while the machine is operating, you just have to press the control lever all the way to bring the head to maximum rotation and at the same time knock the head against the ground, which causes the line to feed out automatically. Its length can be adjusted simply, by cutting any excess to the length of the cutting blade located on the end of the guard.
For further information, see the instruction manual. The line no longer feeds out from the head. What might have happened? The line failing to feed out may be associated with two main factors. The first, and the most likely, is that the line might be all used up and should therefore be replaced with a new reel. There is also the possibility that the line within the head has accidentally become caught in its own windings, and is preventing the end from freely feeding out through the holes. In this case, simply open the head and re-spool the line correctly inside.
These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem. How to fill the fuel tank How to clean the air filter How to replace the trimming line How to mount the metal blade 4 videos